Terminal clamp SP 11 EBB

Terminal clamp SP 11 EBB, one side pierced

Insulation piercing terminal SP 11 EBB, AL-sided 16-95

Caliper is used to branch to the non-isolated conductors AL
insulated wires and AsXSn ASXS type (cross sections from 16 to 95 mm²).
Most often used for branching from the line of the old
AL on the rope isolated.

4-1 4-2 3-2 3-1

Terminal clamp SP 11 EBB, two(both) side pierced

The clamp is used for insulated wires of the branch type and ASXS
AsXSn-section of 16 to 95 mm².

5-2 5-1 3-2 3-1


- Aluminium alloy, durability, tension 300 N / mm²
- Hex Bolts: Stainless steel M8x45, A2.80
- Housing: made of plastic, resistant to radiation
UV and other atmospheric factors
- The connector is milled and lubricated paste. Stainless steel spring
holding parts of the connector open during the installation